Neap Archives - Blutide - Taps Inspired by Life

Neap – incorporating a balance between contemporary and neoteric the simplicity of this range adds to its allure.

Showing all 14 results

Pillar Tap – 15mm | Neap

NT00050

15mm Pillar tap comes with a plastic backnut. These are used on 2 tap hole basins and in some instances where just cold water is being installed you can install just1 pillar tap.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Bib Tap – 15mm | Neap

NT00060

15mm bib tap is a wall mounted tap that will usually be bought with a 15mm extension piece. The reach of the bib tap is 98mm.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Hose Bib Tap | Neap

NT00016

15mm Hose Bib tap has a reach of 83mm and a ¾” outlet.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Extended Bib Tap – 15mm | Neap

NT00065

15mm extended bib tap is a wall mounted tap that has a reach of 128mm. It is supplied complete with a coverplate. There is no need to add an extension piece to this tap as it is designed to reach over the bath, basin or sink.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
U/T Stop Tap CxC – 15mm | Neap

NT00000

15mm Undertile stoptap C x C is supplied with 2 x compression fittings. Manufactured out of DZR brass the undertile complies with the national bylaws. Our spindle/headpart is supplied by one of the biggest headpart manufacturers in the world so you are assured of longevity of the product. All our undertiles go through intense quality control procedures before they are supplied to the market.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
U/T Stop Tap CxC – 15mm | Neap Brushed Stainless Steel

NT0S000

15mm Undertile stoptap C x C is supplied with 2 x compression fittings. Manufactured out of DZR brass the undertile complies with the national bylaws. Our spindle/headpart is supplied by one of the biggest headpart manufacturers in the world so you are assured of longevity of the product. All our undertiles go through intense quality control procedures before they are supplied to the market.

Type: Conventional
Finish: Brushed Stainless Steel

Read more

Add to Wishlist

Add to Wishlist
U/T Stop Tap CxC – 15mm | Neap Gunmetal

NT0M000

15mm Undertile stoptap C x C is supplied with 2 x compression fittings. Manufactured out of DZR brass the undertile complies with the national bylaws. Our spindle/headpart is supplied by one of the biggest headpart manufacturers in the world so you are assured of longevity of the product. All our undertiles go through intense quality control procedures before they are supplied to the market.

Type: Conventional
Finish: Gunmetal

Read more

Add to Wishlist

Add to Wishlist
Basin Mixer Tap Swivel Spout | Neap

NT00013

The basin mixer with a swivel spout. Used on 1 tap hole basins it is supplied with 2 x 1/2″ braided inlet tubes that are 350mm in length. The reach of the spout is 135mm.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Sink Mixer Tap W/T Std Offset | Neap

NT00022

The Neap range wall type sink mixer has a swivel spout and the reach is 184mm. Included with the mixer are 2 x S-connections and coverplates. The inlet centres are 150mm apart and is adjustable from 130mm to 170mm.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Single Hole Sink Mixer Tap | Neap

NT00019

The Neap range one hole sink mixer has a swivel spout and the reach is 185mm. Included with the mixer are 2 x 1/2″ braided inlet tubes that are 350mm in length. It can be used on a double bowl or single bowl sink.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Prep Bowl Tap | Neap

NT00032

This prep bowl tap has a comfortable reach of 185mm and the height is 216mm.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
Bath Mixer Tap W/T Std Offset | Neap

NT00030

Neap range wall type bath mixer comes complete with a wall bracket, hand shower and hose. Included with the mixer are 2 x S-connections and coverplates. The Inlet centres on this mixer is 150mm apart and is adjustable from 130mm to 170mm.

Type: Conventional
Finish: Chrome

Read more

Add to Wishlist

Add to Wishlist
U/T Stop Tap CxC – 15mm | Neap Black

NT0B000

15mm Undertile stoptap C x C is supplied with 2 x compression fittings. Manufactured out of DZR brass the undertile complies with the national bylaws. Our spindle/headpart is supplied by one of the biggest headpart manufacturers in the world so you are assured of longevity of the product. All our undertiles go through intense quality control procedures before they are supplied to the market.

Type: Conventional
Finish: Black

Read more

Add to Wishlist

Add to Wishlist
U/T Stop Tap CxC – 15mm | Neap Brushed Brass

NT0A000

15mm Undertile stoptap C x C is supplied with 2 x compression fittings. Manufactured out of DZR brass the undertile complies with the national bylaws. Our spindle/headpart is supplied by one of the biggest headpart manufacturers in the world so you are assured of longevity of the product. All our undertiles go through intense quality control procedures before they are supplied to the market.

Type: Conventional
Finish: Brushed Brass

Read more

Add to Wishlist

Add to Wishlist