Showing 1–16 of 94 results
-
Single Hole Sink Mixer Tap | Neo Black
NM0B019
The Neo Black sink mixer has a reach of 225mm and the height from the base to the outlet is 280mm. Overall height is 380mm. Included with this mixer are 2 x ½” braided inlet tubes that are 350mm in length. The diameter drilled into the surface (granite) for installation should be between 30-35mm.
Type: Single Lever
Finish: Black -
Pull Out Sink Mixer Tap | Neo Black
NM0B017
The Neo Black pull-out sink mixer has a reach of 228 mm and the height from the base to the outlet is 230mm. Overall height is 435mm. Included with this mixer are 2 x ½” braided inlet tubes that are 350mm in length. The diameter drilled into the surface (granite) for installation should be between 30-35mm.
Type: Single Lever
Finish: Black -
Single Hole Sink Mixer Tap | Neo Brushed Stainless Steel
NM0S019
The Neo Brushed Stainless Steel sink mixer has a reach of 225mm and the height from the base to the outlet is 280mm. Overall height is 380mm. Included with this mixer are 2 x ½” braided inlet tubes that are 350mm in length. The diameter drilled into the surface (granite) for installation should be between 30-35mm.
Type: Single Lever
Finish: Brushed Stainless Steel -
Pull Out Sink Mixer Tap | Neo Brushed Stainless Steel
NM0S017
The Neo Brushed Stainless Steel pull-out sink mixer has a reach of 228 mm and the height from the base to the outlet is 230mm. Overall height is 435mm. Included with this mixer are 2 x ½” braided inlet tubes that are 350mm in length. The diameter drilled into the surface (granite) for installation should be between 30-35mm.
Type: Single Lever
Finish: Brushed Stainless Steel -
U/T Stop Tap CxC – 15mm | Neap Gunmetal
NT0M000
15mm Undertile stoptap C x C is supplied with 2 x compression fittings. Manufactured out of DZR brass the undertile complies with the national bylaws. Our spindle/headpart is supplied by one of the biggest headpart manufacturers in the world so you are assured of longevity of the product. All our undertiles go through intense quality control procedures before they are supplied to the market.
Type: Conventional
Finish: Gunmetal -
Single Hole Sink Mixer Tap | Bore
BT00018
The Bore range single hole sink mixer has a swivel spout and the reach is 168mm. Included with the mixer are 2 x 1/2″ braided inlet tubes that are 350mm in length.
The diameter drilled into the surface (granite) for installation should be between 30-35mm diameter.Type: Single Lever
Finish: Chrome -
Single Hole Sink Mixer Tap | Bore
BT00019
The Bore range one hole sink mixer has a swivel spout and the reach is 222mm. Included with the mixer are 2 x 1/2″ braided inlet tubes that are 350mm in length. The diameter drilled into the surface (granite) for installation should be between 30-35mm diameter.
Type: Single Lever
Finish: Chrome -
Single Hole Sink Mixer Tap | Shore
SH00019
The Shore range one hole sink mixer has a swivel spout and the reach is 200mm. Included with the mixer are 2 x 1/2″ braided inlet tubes that are 350mm in length. The diameter drilled into the surface (granite) for installation should be between 30-35mm diameter.
Type: Single Lever
Finish: Chrome
